VHF/UHF ALL MODE TRANSCEIVER
IC-910H
The New Dimension in
the VHF/UHF World!
 100W
of stable output power
A powerful 100W* of output power is provided by the newly
designed power amplifier circuit, which employs bipolar transistors in
parallel. The combination of the aluminum die-cast chassis and effective
cooling fan ensures stable output for continuous operation.
* 75W on 430MHz band and 10W on 1200MHz
band
High performance receiver
The IC-910H offers
0.11µV of high sensitivity (at 10db S/N on SSB, CW mode), while the image
and spurious responses are minimized for good signal fidelity. Used with
the optional preamplifiers for each band, indispensable for obtaining weak
signals in DX or satellite communication, you will experience top class
receiving characteristics in the VHF/UHF bands.
Ready-to-install
1200MHz BAND UNIT
By installing the optional UX-910 1200MHZ BAND
UNIT, the IC-910H becomes an all mode tri-band transceiver. You can also
enjoy cross band and full duplex operation. Measuring only 241(W)×94(H)×
239(D) mm, and weighting 4.5kg (without UX-910)*, its compactness and light weight is
convenient for field operation.
* approx;
91.2(W)×311.16(H)×913.32(D) in.; 929.32lb
Optional down
converter, AG-2400
The optional AG-2400 converts a 2.4GHz satellite
downlink signal to a 144MHz signal. Coupled with the satellite mode of the
IC-910H, the US mode and LS (UX-910 required) mode satellite operation
ready for use. Down-to-earth satellite operation in your
shack!
9600bps packet operation
The IC-910H has two data
sockets for simultaneous two band packet communications. Setting of the
packet communication can be made easily in the set
mode.
Satellite communication
In the satellite mode, the
down/up link frequencies are displayed on the MAIN and SUB band
respectively. Reverse/normal tracking and doppler shift compensation are
standard, and 10 satellite memory channels store down/up link frequencies
and operating mode.
 And
more
- All receiver functions, including IF shift, sweep, noise blanker, RF
attenuator, also work in the SUB band
- The sweep function observes conditions around the set frequency
- 4 types of scanning are activated on each band independently
- The memory pad stores the operating frequencies and modes
temporarily
- Electronic keyer with a dot/dash ratio control is built-in
- FM-narrow mode receivable (except 1200MHz band)
- 50 CTCSS tone encoder/decoder and one touch repeater function
- Optional UT-106 DSP UNIT available
- CI-V capability for PC control
SPECIFICATIONS
| GENERAL |
| Frequency
coverage |
| : |
| Version |
144MHz
band |
430MHz
band |
1200MHz
band*1 |
| Europe |
144.0-146.0 |
430.0-440.0 |
1240.0-1300.0 |
| U.S.A. |
Tx:
144.0-148.0
Rx: 136.0-174.0* |
Tx:
430.0-450.0
Rx: 420.0-480.0* |
Tx:
1240.0-1300.0
Rx: 1240.0-1320.0 |
| Australia |
144.0-148.0 |
430.0-440.0 |
1240.0-1300.0 |
| Sweden |
144.0-146.0 |
432.0-438.0 |
1240.0-1300.0 |
*Guaranteed
range: 144.0-148.0MHz; 430-450MHz |
|
| Mode |
: SSB, CW, FM, FM-N*2 |
| Frequency
stability |
: ±3ppm (-10°C to
+60°C) |
| Frequency
resolution |
: SSB, CW
1Hz
FM 100Hz |
| No. of memory
channels |
: 328*1
(99 regular, 1 call, 6
scan edges for each band plus 10 satellite memories) |
| Operating temperature
range |
: -10°C to +60°C ; +14°F to
+140°F |
| Power supply
requirement |
: 13.8V DC ±15% (negative
ground) |
| Current drain
(at 13.8 V DC) |
: Transmit
high
23.0A (8.0A at 1200MHz band*1)
low
7.0A (4.5A at 1200MHz band*1)
Receive
max.audio
2.5A (3.5A at 1200MHz band*1)
stand-by
2.0A (3.0A at 1200MHz band*1)
|
Dimensions
(projections
not incl.) |
:
241(W)×94(H)×239(D) mm ; 9 1/2(W)×3 11/16(H)×9 13/32(D)
in. |
| Weight
(approx.) |
: IC-910H 4.5kg ;
929.32lb
UX-910 0.85kg ; 17.8lb |
| Antenna
connector |
: VHF SO-239 (50 )
UHF Type-N (50) |
|
| TRANSMITTER |
Output
power
(continuously adjustable) |
: 144MHz band
5.0-100W
430MHz band 5.0-75W
1200MHz
band*1 1.0-10W |
| Modulation
system |
: SSB Balanced
modulation
FM Variable reactance
modulation |
| Spurious emission |
: 144, 430MHz
band Less than .60dB
1200MHz band*1 Less than
.50dB |
| Carrier
suppression |
: More than
40dB |
| Unwanted sideband |
: More than
40dB |
| Microphone
connector |
: 8-pin connector (600) |
|
| RECEIVER |
| Receiver
system |
:
VHF
SSB, CW Single conversion
superheterodyne
FM Double conversion
superheterodyne
UHF
SSB,
CW Double conversion superheterodyne
FM
Triple conversion superheterodyne |
| Intermediate
frequencies |
: (Unit: MHz) |
 |
Mode |
MAIN
band |
SUB
band |
| 1st |
2st |
3st |
1st |
2st |
3st |
| 144MHz band |
SSB |
10.8500 |
- |
- |
10.9500 |
- |
- |
| CW |
10.8491 |
- |
- |
10.9491 |
- |
- |
| FM |
10.8500 |
0.4550 |
- |
10.9500 |
0.4550 |
- |
| 430MHz band |
SSB |
71.2500 |
10.8500 |
- |
71.3500 |
10.9500 |
- |
| CW |
71.2491 |
10.8491 |
- |
71.3491 |
10.9491 |
- |
| FM |
71.2500 |
10.8500 |
0.4550 |
71.3500 |
10.9500 |
0.4550 |
| 1200MHz band*1 |
SSB |
243.8500 |
10.8500 |
- |
243.9500 |
10.9500 |
- |
| CW |
243.8491 |
10.8491 |
- |
243.9491 |
10.9491 |
- |
| FM |
243.8500 |
10.8500 |
0.4550 |
243.9500 |
10.9500 |
0.4550 |
|
| Sensitivity |
:
SSB,CW 0.11µV (at 10dB
S/N)
FM 0.18µV (at 12dB
SINAD) |
| Squelch
sensitivity |
:
SSB,CW 1.00µV (at
threshold)
FM 0.18µV (at
threshold) |
| Selectivity |
:
SSB,CW More than 2.3kHz/-6dB Less than
4.2kHz/-60dB
FM More than
15.0kHz/-6dB Less than 30kHz/-60dB
FM-N*2 More than
6.0kHz/-6dB Less than 18kHz/-60dB |
| Spurious rejection
ratio |
: More than 60dB (Except
1200MHz band*1) |
Audio output power
(at
13.8V DC) |
: More than 2.0W at 10%
distortion with an 8 load |
| RIT variable
range |
:
SSB,CW 1.0kHz (2.0kHz at 1200MHz band*1)
FM
5.0kHz (10.0kHz at 1200MHz band*1) |
| External speaker
connector |
: 2-conductor 3.5mm (1/8")
8 connector
× 2
(for MAIN and SUB
bands) |
*1 An optional UX-910 1200MHZ BAND UNIT is required
for 1200MHz operation.
*2 FM-N is not available in 1200MHz
band.
Supplied Accessories
- DC power cable.
- Spare fuses
- Hand microphone (HM-12)
All stated specifications are
subject to change without notice or obligation.
OPTIONS
PREAMPLIFIERS
- AG-25/AG-35 WEATHERPROOF PREAMPLIFIERS
External
all-weather, mast-mounting preamplifier for compensating for coaxial
cable loss.
AG-25: for 144MHz band; AG-35: for 430MHz band.
- AG-2400 DOWN CONVERTER
All-weather, satellite down
converter with superior NF and gain. Input frequency : 2400–2402MHz,
Output frequency : 144–146MHz Conversion gain: More than 25dB Total NF:
Less than 1.5dB
INTERNAL UNITS AND FILTERS
- FL-132/FL-133 CW NARROW FILTERS
FL-132 is for the main
band; FL-133 is for the sub band operation. Center freq.: 10.8491MHz
(FL-132); 10.9491MHz (FL-133) Passband width: 500Hz/-6dB
- CR-293 HIGH STABILITY CRYSTAL UNIT
Frequency stability:
±0.5ppm at 0°C to +60°C.
- UT-102 VOICE SYNTHESIZER UNIT
Provides audible
confirmation of frequency and mode with a clear,
electronically-generated voice.
- UT-106 DSP UNIT
Provides AF DSP functions, such as noise
reduction and auto notch. When 2 units are installed, the DSP function
works for MAIN/SUB band simultaneously.
- UX-910 1200MHz BAND UNIT
Allows you additional all-mode
operation on the 1200MHz band.
MICROPHONES AND
SPEAKER
- HM-12 HAND MICROPHONE
- SM-20 DESKTOP MICROPHONE
- SP-7 EXTERNAL SPEAKER (8/5W)
OTHERS
- CT-17 CI-V LEVEL CONVERTER
- IC-MB5 MOBILE MOUNTING BRACKET
- MB-23 CARRYING HANDLE
|
 |
|
