Home About Us Services Products Contact Us

DUAL BAND FM TRANSCEIVER
IC-2720H       
IC-2720H Twice the versatility, twice the fun!

V/V, U/U simultaneous receive capability
The IC-2720H is a unique dual band mobile, providing VHF/VHF, UHF/UHF simultaneous receive capability along with VHF/UHF duplex operation. Simple touch of a button changes the transmit band.

Independent controls for each band
Operating two bands simultaneously is very simple with Icom's symmetric layout with a wide LCD display showing both band settings in an easy to read side by side format. The IC-2720H provides separate tuning, volume, squelch knobs and function buttons the left and right side bands. Also, listen to both bands independently through separate left and right band audio jacks.

Dynamic Memory Scan (DMS)
With 212 memory channels, Icomfs exclusive Dynamic Memory Scan system gives you flexibility over your scanning lists, fully customizable in 10 banks.

Wideband receiver
Keep on top of what is happening with the IC-2720H's wideband receiver. Covering from 118-549 and 810-99MHz*, you will be able to listen to almost any communications!
(* Receiver range differs depending on version)

HM-133, remote control microphone
The Icom exclusive "Hot keys" (F1/F2) memorize the most commonly used transceiver settings.

DTCS and CTCSS
The IC-2720H incorporates 104×2 DTCS and 50 CTCSS tone codes along with a tone scan function. Don't miss out on communications because of not having the proper type of "tones"! The "pocket beep" feature gives you an audible and visible indicator of an incoming call.

Compact, remote controller
The controller with the 3.5m (11.5') separation cable is an easy to install two pieces configuration. This configuration offers the flexibility of mounting the controller while placing the main unit in an outof-the-way location without any additional cost. Microphone jacks are mounted both on the controller and main unit of the radio!

And more...
  • 10dB RF attenuator
  • Selectable squelch delay
  • 9600bps packet data terminal (mini-DIN 6-pin connector)
  • Optional MB-85 allows you to mount the controller to the main unit
  • 14 DTMF memory channels (24 digits)
  • Sub band auto mute function
  • MOS-FET power amplifier
  • Weather Alert
  • Auto repeater function
  • Wide/narrow channel spacing


SPECIFICATIONS

 GENERAL
Frequency coverage : Guaranteed   144 - 148, 440 - 450 MHz*
        *Tx working range 430 - 450
  Rx (Left); 118 - 549.995 MHz 
      (Right); 118 - 173.995, 375 - 549.995, 810 - 999.990** MHz
         *Cellular blocked
Mode : FM, AM*                  *Rx only; not guaranteed
Number of memory ch. : 212 (incl., 10 scan edges and 2 call Ch.)
Antenna connector : SO-239 (50 ohm)
Power supply requirement : 13.8 V DC ±15% (negative ground)
Frequency stability : ±10 ppm -10°C to +60°C
Current drain
: Tx
 
  Rx		   VHF 50 W
  UHF 35 W
  Standby
  Max. audio 		   12 A
  11 A
  1.2 A
  1. 8 A
Usable temp. range : -10°C to +60°C; +14°F to +140°F
Dimensions
 (projections not included)		 : Controller; 140(W) × 50(H) × 24.5(D) mm;
                 5 1/2(W) × 1 31/32(H) × 31/32(D) in
  Main unit; 140(W) × 40(H) × 187(D) mm;
                 5 1/2(W) × 1 9/16(H) × 7 3/8(D) in
Weight : Controller;150 g; 5.29 oz
  Main unit; 1.25 kg; 2.75 lb
 TRANSCEIVER
Output power
 (continuously adjustable)		 : VHF; 50 W, 15 W typ., 5 W typ. selectable
  UHF; 35 W, 15 W typ., 5 W typ. selectable
Modulation system : Variable reactance modulation
Spurious emission : Less than -60 dB
Microphone connector : 8-pin modular (600 ohm)
 RECEIVER
Receive system :　Double-conversion superheterodyne system
Intermediate frequencies : 1st 38.85/46.05 MHz
  2nd 450/455 kHz
Receive Sensitivity (at 12dB SINAD) :　Less than 0.18 µV
Selectivity
: More than 12/6　kHz at -6dB
  Less than 30/20 kHz at -60 dB 
Spurious and image
rejection ratio
: More than 60 dB
  
Audio output power (at 13.8 V DC) : More than 2.4 W at 10% distortion with an 8 ohm
Ext SP connector : 2-connector 3.5 (d) mm (1/8")

Supplied accessories:
  • Hand microphone, HM-133
  • DC power cable, OPC-1132
  • Mounting bracket, MB-84
  • 3.5 m (11.5 ft) separation cable
  • Spare fuse
All stated specifications are subject to change without notice or obligation.

OPTIONS
  • HM-118N HAND MICROPHONE
    Regular hand microphone.

  • HM-118TN/TAN HAND MICROPHONE
    DTMF microphones with keypad backlighting.

  • HM-133 HAND MICROPHONE
    Remote control microphone with keypad backlighting. Same as supplied.

  • CS-2720 + OPC-478/OPC-478U CLONING SOFTWARE + CLONING CABLE
    For quick and easy programming of memories, etc. 
    OPC-478: RS-232C cable; OPC-478U: USB cable

  • SP-7/SP-10 EXTERNAL SPEAKER

  • OPC-440/OPC-647 MIC EXTENSION CABLES
    OPC-440: 5.0 m (16.4 ft); OPC-647: 2.5 m (8.2 ft)

  • OPC-589 MIC ADAPTER CABLE
    Allows you to connect an 8-pin microphone.

  • OPC-441 SPEAKER EXTENSION CABLE
    5.0m (16.4ft) of extension cable for speaker.

  • OPC-347/OPC-1132 DC POWER CABLES
    OPC-347: 7.0m (23ft); OPC-1132: 3.0m (9.8ft)

  • OPC-1155/OPC-1156 SEPARATION CABLES
    3.5m (11.5ft) of extension cable for remote controller. 
    A modular connector is supplied with OPC-1156.

  • MB-84 CONTROLLER BRACKET
    Mounts the remote controller in a convenient location for operation with the controller detached.

  • MB-85 COMBINATION BRACKET
    Mounts the remote controller to the main unit. 
    20cm (7.87in.) separation cable is supplied.

  • MB-65 MOUNTING BASE
    Mounts the remote controller with the MB-84. 
    Adjustable angle and direction for optimum positioning.

  • MB-17A MOBILE MOUNTING BRACKET
    The main unit is easily attached and removed.


  HOME  |  ABOUT US  |  SERVICES  |  PRODUCTS  |  CONTACT US

  Copyright © 2005 Japan Marine Equipments.
  Designed By A.M Advertising