Home About Us Services Products Contact Us

IC-F30GT IC-F30GS VHF AND UHF TRANSCEIVERS
IC-F30GT   VHF transceiver with keypad
IC-F30GS   VHF transceiver without keypad
IC-F40GT   UHF transceiver with keypad
IC-F40GS   UHF transceiver without keypad

Leading business communication into the 21st Century

If you want a durable, versatile, reliable and easy-to-operate portable communications tool, the IC-F30G & IC-F40G series is designed for you. This series is designed for commercial communication or professional use with a host of built-in features, such as multiple tone-signalings, Flash-ROM, high speed PLL, Compander function and more. Not only for conventional operation, but also compatible with Trunking systems*, this series is particularly useful for organizations that have large communications fleets. Icom's technologies guarantee to satisfy your needs.
* Optional unit is required.

Full built-in tone-signalings
All tone-signalings are built-in such as CTCSS, DTCS, 2-tone/5-tone and DTMF encode/decode, so you don't need to install an optional tone-signaling board. And a wide variety of selective calling systems are available to call specific station(s) or control a repeater. In addition, ANI (Automatic Number Indication) function is available with 2-tone/5-tone and DTMF.

Largest LCD in its class
With the large LCD, a simple sentence of up to 24 full-dot matrix characters provides more smooth communication than previous one word indication. Operational icons, such as antenna (S-meter) or battery life, show various operating status at a glance. What is more, original characters can be made and indicated on the LCD.

8 × 20 dot character can be made on a PC and plural characters can be combined on LCD.

Durable construction
The body is compact, yet the polycarbonate panel and one-piece aluminum chassis provides durable construction to meet MIL STD grade C, D and E for shock and vibration. You can count on the unit to operate in challenging environments.

Icom's advanced technology
A newly designed ultra high speed PLL, with a Fractional-N system, offers faster acquisition times for efficient trunking use. Flash ROM allows future system upgrades and future compatibility with other protocol. 820 dot character can be made on a PC and plural characters can be combined on LCD.

Up to 8 dealer-programmable key assignments
The following functions can be programmed in conventional mode or SmarTrunk mode.
: Channel up/down
: Scan A/B start/stop
: Monitor
: High/Low
: Trunking group SW
: Emergency single/repeat
: OPT 1/2/3 momentary
: Bank up
: Scan Tag add/delete
: Scrambler
: Talk around
: Tx code enter
: DTMF autodial
: Compand
: Call
: Priority A/B
: C. Tone CH enter
: ID-MR select
: Re-dial
: Turbo SpeeDial A/B/C/D
: Wide/Narrow
: Beep
: Key lock
: MR-CH 1/2/3/4
: Null (Light)
: Tx code CH select
: Special function 1/2

Advanced PC programming for Microsoft® Windows® 95/98

256 memory Channels
Up to 256 memory Channels with 12 character channel names can be stored with up to 16 banks. The rotary selector allows you to select each bank or memory Channel.

Simultaneously work 2 optional internal units
2 optional units can be installed and will work simultaneously. You can select optional units to suit your needs and to provide versatile usage.

Available simultaneously
UT-113 is available in conventional mode.
UT-105 and the UT-111 have to be installed in slot 1.

* Same optional types, such as UT-109 and UT-110, can not be installed simultaneously.

Prolonged Ni-MH battery
The Ni-MH battery is designed for 10 hours operation. A battery case is optionally available for using a set of alkaline batteries (six AA (LR6) cells) during charging.

Built-in Compander function
Built-in Compander function provides clear audio quality under noisy environments.
* Receiving party must have same function.

Smart design with easy operation
The rounded, compact* design fits comfortably in your palm, and is easy to carry around. The large keypad makes one-hand operation easy.
* Size: 54(W) × 139(H) × 38(D) mm ; 2 1/8(W) × 5 15/32(H) × 1 1/2(D) in

Multi connector for accessories
The 9-pin multi connector, which use the spring action for close contact, allows you reliable operation with accessories, such as speaker-microphone or earphone.

Other features
  • The red key on the top panel can be an emergency trigger
  • Normal and priority scan functions
  • Time-out timer capability
  • Narrow/wide multi-band width and 2-step power save are supported
  • Talk around function changes duplex channels to simplex channel
  • VOX capability and more...


SPECIFICATIONS

 GENERAL
Frequency range
: IC-F30GT/GS    136 - 174 MHz
  IC-F40GT/GS 400 - 430 MHz   440 - 480 MHz
450 - 490 MHz (U.S.A.)
480 - 512 MHz (U.S.A.)
480 - 520 MHz (others)
Number of Channels : Max. 256 Ch/ 16 banks
Type of emission : 16K0F3E (25/30 kHz)
  8K50F3E (12.5/15 kHz)
  14K0F3E (20 kHz)
Channel spacing : 30/15 kHz (25/12.5 kHz)
  20/12.5 kHz
Antenna impedance : 50
Frequency error : ±2.5 ppm (EIA)
  ±1.5 kHz (ETS)
PLL channel step : 5 kHz, 6.25 kHz, 7.5 kHz
Power supply requirement : 7.2 V DC (Icom battery pack)
Current drain (at 7.5 V DC; approx)
: Transmit    at 5 W
at 4 W
1.7 A typ. (IC-F30GT/GS)
1.7 A typ. (IC-F40GT/GS)
  Receive at AF max.
at stand-by   
300 mA
95 mA
Operating temp. range : -30°C to +60°C; -22°F to +140°F (EIA)
  -25°C to +55°C (ETS)
Dimensions
 (projections not included)
: 54(W) × 139(H) × 38(D) mm
  2 1/8(W) × 5 15/32(H) × 1 1/2(D) in
Weight (with BP-210) : 420 g; 14.8 oz
 TRANSMITTER
Modulation system : Variable reactance frequency modulation
Output power (nominal) : 5.0 W (IC-F30GT/GS)
  4.0 W (IC-F40GT/GS)
Max. freq. deviation : ±2.5 kHz, ±5 kHz, ±4 kHz
Modulation limiting : 60 - 100%
Audio harmonic distortion : 3% typ. (1 kHz/40% dev.)
Spurious emissions : -73 dB (EIA)
  Less than 0.25 µW (ETS)
Adjacent Ch. power : 60 dB (ETS; 12.5 kHz)
  70 dB (ETS; 25/20 kHz)
Residual modulation : 43 dB typ. (ETS; 12.5 kHz)
  45 dB typ. (ETS; 25/20 kHz)
External MIC connector : 9-pin multi connector/ 2.2 k
 RECEIVER
Intermediate freq.
: 1st     31.65 MHz (IC-F30GT/GS)
47.25 MHz (IC-F40GT/GS)
  2nd 450 kHz
Sensitivity : 0.25 µV typ. (at 12 dB SINAD)
  0.63 µV typ. (at 20 dB SINAD) e.m.f.
Squelch sensitivity : 0.25 µV (at threshold)
Adjacent Ch. selectivity : 63 dB typ. (ETS; 12.5 kHz)
  73 dB typ. (ETS; 25 kHz)
Spurious response : 70 dB (EIA)
  70 dB (ETS)
Intermodulation : 74 dB typ. (EIA)
  70 dB typ. (ETS)
Hum and noise ratio : 40 dB typ. (EIA; 12.5 kHz)
  43 dB typ. (EIA; 25/20 kHz)
  43 dB typ. (ETS; 12.5 kHz)
  45 dB typ. (ETS; 25/20 kHz)
Audio output power : 0.5 W typ. at 5% distortion with an 8 load
External SP connector : 9-pin multi connector/ 8

Applicable U.S. Military Specifications
Icom makes rugged products that meet MIL-STD requirements and strict environmental standards as follows.

Standard MIL 810C MIL 810D MIL 810E
Method Procedure Method Procedure Method Procedure
Vibration 514.2 X 514.3 I 514.4 I
Shock 516.2 I 516.3 I 516.4 I

Measurements made in accordance with EIA-152C/204D, TIA-603 or ETS 300-086. All stated specifications are typical and subject to change without notice or obligation.

Microsoft and Windows are registered trademarks of Microsoft Corporation in the U.S.A. and other countries. SmarTrunk II is a trademark of the SmarTrunk System Corporation. LTR is a registered trademark of the EFJohnson Radio Systems.


OPTIONS
BATTERY PACKS AND CASE
Battery packs and case
Approx. output power and battery life (Tx (Hi): Rx: standby=5:5:90)
BATTERY PACK OUTPUT POWER BATTERY LIFE
(approx.)
IC-F30GT/GS IC-F40GT/GS
BP-208 1 W typ. 1 W typ. __
BP-209 5 W typ. 4 W typ. 6.5 hours
BP-210 5 W typ. 4 W typ. 10 hours

  • BC-137 (#02) BATTERY CHARGER + BC-122 AC ADAPTER
    Regularly charges a battery pack, BP-209 or BP-210, with/without transceiver. The AC adapter, BC-122, is additionally required.

  • BC-144 DESKTOP CHARGER + BC-145A/E/V AC ADAPTER
    For rapid charging of battery packs.The BC-145A/E/V may be supplied on version. Charging time : 1.5 to 2 hours. BC-119 DESKTOP CHARGER is also available for rapid charging with AD-94 (#02) CHARGER ADAPTER

  • BC-121 MULTI-CHARGER + AD-94 (#02) CHARGER ADAPTER + BC-124 AC ADAPTER
    For rapid charging of up to 6 battery packs (six AD-94s are required.), BP-209 or BP-210. The BC-124 outputs 12 V DC and has 7 A capacity for the BC-121. Charging time: 1.5 to 2 hours.

  • MB-74 BELT CLIP
    Alligator type. Clips onto almost anything in a variety of convenient places.

  • MB-68 BELT CLIP
    Same as that supplied is also available.

  • EM-80
    Durable, full-sized microphone with internal speaker.

  • EM-89
    Slim dimensions. Equipped with an ear-phone jack and a transmit indicator.

  • AD-52 EARPHONE JACK ADAPTER
    Transforms 9-pin multi connector to ø 3.5 mm(1/8") earphone connector.

  • UT-105
    Provides SmarTrunk IITMcapabilities.

  • UT-109
    Provides operating security. Up to 32 scrambling codes are available. The scrambling system is not compatible with the UT-110.

  • UT-110
    Provides higher operating security. Up to 1020 (255 codes × 4 groups) scrambling codes are available. The scrambling system is not compatible with the UT-109.

  • UT-111
    Provides LTR® trunking capabilities.

  • UT-113
    Automatically sends an emergency signal when the transceiver is left in a horizontal position.


    ANTENNA

  • FA-SC25V : VHF ANTENNA FOR 136 - 155 MHz

  • FA-SC55V : VHF ANTENNA FOR 146 - 174 MHz

  • FA-SC25U : UHF ANTENNA FOR 400 - 430 MHz

  • FA-SC57U : UHF ANTENNA FOR 440 - 470 MHz

  • FA-SC72U : UHF ANTENNA FOR 470 - 520 MHz

    ANTENNA ADAPTER CONNECTOR AD-98FSC
    Allows you to connect a BNC-type antenna. (For maintenace use only)





  HOME  |  ABOUT US  |  SERVICES  |  PRODUCTS  |  CONTACT US

  Copyright © 2005 Japan Marine Equipments.
  Designed By A.M Advertising