VHF/UHF TRANSCEIVERS
IC-F14 VHF transceiver (rotary type)
IC-F14S VHF transceiver (toggle type)
IC-F24 UHF transceiver (rotary type)
IC-F24S UHF transceiver (toggle type)
 Built to last, built to
work!
The IC-F14/S series shows Icom's new direction in
LMR radio dene sign. Simple operation for everyon but a powerful and
reliable tool for your daily business. Its very durable construction is
resistant to shock and vibration. The dual rail guide design securely
locks the battery pack to the radio. Wide range frequency coverage, Li-Ion
battery pack, loud and clear audio, built-in signalings and option unit
connector combined with Icom grade electrical performance,the IC-F14/S
series will easily exceed your expectations.
  Tough and reliable construction
The IC-F14/S series
is built around an aluminum die-cast chassis and covered with tough
polycarbonate casing. This radio is built to last. Its dual slide rail
securely locks the battery to the radio. The battery terminal is covered
with a non-corrosive rubber packing. The belt clip is clamped between the
radio and the battery, making it nearly impossible to knock
loose.
Simple operation
Having only 3 buttons, volume and
channel knobs, the IC-F14/S series does not require special training to
use. Positive button action for sure operation even when wearing gloves,
allows you to get down to the business of communicating without
fuss.
Wide frequency coverage
The IC-F14/S series covers
a wide frequency range with one version (136–174, 400–470, 450–512 (520)
MHz). Wide and narrow channel spacing (25, 12.5kHz) is programmable per
channel.
Lithium-Ion battery standard
The IC-F14/S series
comes with the BP-231 Li-Ion battery pack as standard. Li-Ion batteries
have virtually no memory issues and allows you flexible charging. In
addition, the optional BP-232 provides a high capacity 2000mAh for longer
operating time.
Optional board
The IC-F14/S series has an
expansion socket for adding an optional board. Voice scrambler, man down
and DTMF decoder features are available, depending on the installed
board.
Most popular signalings built-in
Use the built-in
2-Tone, 5-Tone, CTCSS and DTCS capabilities as standard to set up your own
talk groups and quiet stand-by when others are talking.
Multiple
2-Tone, Multiple 5-Tone
Up to 10 2-Tone/8 5-Tone codes can be
decoded on a channel. When a matched tone is received, the following items
are programmable for each code.
- Beep sound
- Answer back
- Stun
- LED blink
- Scan
Other features
- LED low battery alert
- TOT function and lock out penalty timer
- 2 step power saver
- Normal and priority scan
- 500mW loud and clear audio
- Optional VOX headset for hands free operation
- PC programming capability
- Embedded ESN (Electronic serial number)
SPECIFICATIONS
| Frequency coverage |
: IC-F14/F14S
:
IC-F24/F24S |
|
136 – 174 MHz
400 –
470 MHz
450 – 512 MHz
450 – 520
MHz
|
|
| Number of channels |
: Total 16 (IC-F14,
IC-F24)
Total 4 (Max.,IC-F14S, IC-F24S) |
| Channel spacing |
: 12.5KHz/25
kHz |
| PLL channel step |
: 2.5 kHz, 3.125 kHz
(VHF)
5KHz, 6.25KHz (UHF) |
| Output power |
: 5 W, 2W or 1W
(VHF)
4 W, 2W or 1W (UHF) |
| Spurious emissions |
: 80dBc typ. |
| Adjacent channel
power |
: 80 dB
typ.
70 dB typ. |
|
Wide
Narrow |
|
| Frequency error |
: ±2.5ppm |
| Sensitivity |
: 0.25 µV typ. at 12 dB
SINAD |
| Adjacent channel
selectivity |
: 75 dB
typ.
65 dB typ. |
|
Wide
Narrow |
|
| Spurious response |
: 70 dB |
| Audio output power |
: 500 mW (type.) at 5%
distortion an 8 ohm |
| power Supply
Requirement |
: 7.2V DC |
| Current Drain |
:
Receive
Transmit
|
|
70 mA
(stand-by)
300 mA (rated audio)
1.6 A (high)
0.7A
(Low 1W) |
|
| Usable temperature
range |
: –30°C to +60°C, –22°F to
+140°F |
| Dimensions (proj. not
included) |
: 53(W) × 120(H) × 38(D)
mm
23/32(W) ×
423/32(H) × 11/2(D)
in |
| Weight (with
BP-231) |
: 260 g, 9.2oz |
Measurements made in accordance
with EIA/TIA-603.
All stated specifications are subject to
change without notice or obligation.
Supplied
Accessories
(May differ according to version)
- Battery pack:BP-231
- Antenna
- Belt clip: MB-94
- Option Sheet
OPTIONS
- BC-160 DESKTOP CHARGER + BC-145 AC ADAPTER
For
rapid charging a battery pack. Charges the BP-231 in 2 hours (approx.).
- BC-121N MULTI-CHARGER + AD-106 DESKTOP CHARGER
ADAPTER
For charging up to 6 batteries simultaneously. An AC adapter
may be supplied depending on version. Six AD-106's are necessary.
Charging time: 2 hours (approx.).
- BC-157 AC ADAPTER
12 V/7A for use with BC-121.
- BP-230 Li-Ion BATTERY PACK
7.4V/800 mAh __ Operating time; 5.5 hours*
- BP-231 Li-Ion BATTERY PACK
7.4V/1150 mAh __ Operating time; 8 hours*
- BP-232 Li-Ion BATTERY PACK
7.4V/2000 mAh __ Operating time; 14 hours*
*Operating time is approximate time (at
20°C).
Tx: Rx: standby=5:5:90
- UT-108 DTMF DECODER UNIT
Provides DTMF, Selective call and
ANI capabilities.
- UT-109 VOICE SCRAMBLER UNIT
Up to 32 scrambling codes are
available. Version 01 is required.
- UT-110 VOICE SCRAMBLER UNIT
Up to 1020 scrambling codes
are available. Version 01 is required.
- UT-113 MAN DOWN UNIT
Automatically sends an emergency
signal when the transceiver is left in a horizontal position for a
preset time.
- HM-131L SPEAKER-MICROPHONE
Durable body. Equipped with an
earphone jack and revolving clip.
- HS-94 HEADSET
Earhook headset with flexible boom
microphone.
- HS-95 HEADSET
Behind-the-head headset with flexible boom
microphone.
- HS-97 HEADSET
Throat microphone fits around your neck and
picks up speech vibration.
- VS-1L PTT/VOX UNIT
Required when using these headsets with
the transceiver.
- STUBBY ANTENNAS
FA-SC56VS; 146-162MHz, FA-SC57VS;
160-174MHz, FA-SC73US; 450-490MHz
- ANTENNAS
FA-SC24V; 136-150MHz, FA-SC55V; 146-174MHz,
FA-SC25U; 400-430MHz, FA-SC57U; 430-470MHz, FA-SC72U;
470-520MHz
- MB-93 BELT CLIP
Swivel type. A fast and easy way to remove
the transceiver from your belt.
- MB-94 BELT CLIP
Alligator type. Same as supplied.
- SP-13 EARPHONE
Provides clear audio in noisy
environment.
|
 |
|
