MF/HF MARINE TRANSCEIVER
IC-M802
  
The latest ICOM Digital Signal
Processor technology with a compact remote
head
Standard 4×8 remote controller
The
IC-M802 offers an industry-standard 4-inch tall (10.16 cm) remote
controller. When set up with the IC-M502 VHF radio, Icom offers you a
complete communications station.
Large LCD with dot matrix
characters
You can easily read the alphanumeric name of any of the
1355 ITU channels at a glance with the large LCD display. Nighttime
operation is no problem with 10 levels (plus OFF) adjustable backlit
display and keypad.
Easy to use in all conditions
The
IC-M802 offers two large dials__bank and
channel__for easy channel selection. Up to 16 banks of 20
(max.) each for user channels, and 17 banks for ITU channels are
available.
Built-in digital selective calling
For added
safety at sea, the IC-M802 offers the latest in one-touch DSC emergency
communications technology. (ITU Class E standard.) The emergency button is
covered by a red, spring loaded hatch to avoid accidental DSC
activation.
Digital signal processor
advantage
 The speech compressor, utilizing DSP, increases
average talk power. Flexible filter settings provide for narrow band
signals like E-mail, SITOR, FSK and other operation without an optional
filter.
150W (PEP) of powerful output
150 Watts of power
offers superior worldwide communications. A one piece, die cast aluminum
chassis and a large cooling fan allow continuous transmission at full
output power__very important for data communications, like
e-mail.
One-touch e-mail access
An SSB first! The IC-M802
can be set to memorize your HF e-mail access frequency, mode and bandwidth
settings. At sea e-mail has never been easier.
* Please consult with an
HF e-mail provider for details.
Automatic antenna tuner,
AT-140
An optional automatic antenna tuner, AT-140, easily connects
to the IC-M802. When the tuner cannot tune the antenna, the IC-M802
bypasses the tuner and displays a warning indicator on the LCD.
ADDITIONAL FEATURES
- Wide band receive coverage (0.5 - 29.9999MHz)
- Remote control mic allows you to select channels directly
- Accessory RS-232C port allows connection of modem, etc.
- GPS input, NMEA 0183 version 2.0 or later
- A headphone jack in front of the controller
SPECIFICATIONS
| GENERAL |
Frequency coverage
(Unit; MHz) |
: Rx 0.5 -
29.9999
Tx 1.6 - 2.9999, 4.0 - 4.9999,
6.0 - 6.9999, 8.0 - 8.9999, 12.0 - 13.9999, 16.0 - 17.9999, 18.0 -
19.9999, 22.0 - 22.9999, 25.- 27.5000 |
| Type of
emission |
: J3E(SSB),
J2B(AFSK), F1B(FSK), A1A(CW), H3E(AM*; Rx Only), |
| Number
of channels |
: 1355 (max.)
(160 programmable channels; 249 ITU SSB duplex; 72 ITU SSB
simplex; 662 ITU FSK duplex; 160 e-mail; 21 ITU 4MHz simplex; 31 ITU
8MHz simplex) |
| Power supply
requirement |
: 13.6 V
DC ±15% (neg. ground) |
Current
drain
(at 13.6 V DC) |
:
Tx max. power
RX (Max. audio
output) |
30 A
(typ.)
3.0 A |
|
| Operating
temperature range |
: -30°C
to +60°C; -22°F to +140°F
(Guaranteed range; -20°C to
+60°C; -4°F to +140°F) |
| Antenna impedance |
: 50Ω
(SO-239) |
Dimensions
(proj. not incl.) |
: Main
unit; 240(W) × 94(H) × 238.4(D) mm; 97/16(W) ×
311/16(H) × 93/8(D)
in
Controller;
220(W) × 110(H) × 84.4(D) mm; 821/32(W) ×
411/32(H) × 35/16(D)
in
Speaker; 110(W)
× 110(H) × 84.4(D) mm; 411/32(W) × 411/32(H) ×
35/16(D) in |
| Weight |
: Main unit; 4.7
kg; 10.36lb
Controller; 570g; 1.26lb
Speaker;
370g; 0.81b
|
|
| TRANSMITTER |
| Output
power |
: 150,
60, 20W PEP (Selectable) |
| Spurious
emissions |
: -62
dB |
| Unwanted
sideband |
:
55dB |
| Carrier suppression |
:
40dB |
| Microphone
impedance |
:
2.4kΩ |
|
| RECEIVER |
Sensitivity
(at 10dB S/N) |
| : |
| Frequency
Range |
J3E, A1A |
J2B, F1B |
H3E |
DSC(J2B) |
| 0.5-1.5999MHz |
6.3µV |
- |
32µV |
0.5µV
(at 1% error rate) |
| 1.6-1.7999MHz |
0.89µV |
0.89µV |
6.3µV |
| 1.8-3.9999MHz |
0.5µV |
0.5µV |
3.2µV |
| 4.0-29.999MHz |
- |
|
|
| Spurious
response rejection ratio |
: More
than 70dB (1.6 - 29.9999MHz) |
| Audio output
power |
: 4 W
typ. at 10% distortion with a 4 ohm load |
| Audio output
impedance |
: 4-8
ohm |
| Clarity variable
range |
:
±150Hz |
| GPS
interface |
: NMEA0183 version
2.0 |
|
Supplied accessories:
- Separation cable, OPC-1106 (5m; 16.4ft)
- Hand microphone, HM-135
- Mounting bracket kits
- External speaker, SP-24
- DC power cable
- Microphone hanger
- ACC plugs
- Spare fuses
All stated specifications are subject to change without
notice or obligation.
OPTIONS
- AT-140 HF AUTOMATIC ANTENNA TUNER
Matches the transceiver
to a long wire antenna with little insertion loss. Cable connections are
easy to install.
- MN-100 ANTENNA MATCHER
Match the transceiver to a dipole
antenna. Covers all HF bands from 1.5 to 30MHz. Two 8m antenna wires
come attached.
- MN-100L ANTENNA MATCHER
Match the transceiver to a
longwire antenna. Covers all HF bands from 1.5 to 30MHz. A 15m antenna
wire comes attached.
- HM-135 HAND MICROPHONE
Water resistant, remote function
mic.
- MB-75 FLUSH MOUNT KIT
For mounting the controller or
speaker to a panel.
- SP-24 EXTERNAL SPEAKER
4×4-inch external speaker. Same as
supplied. Input impedance: 4Ω. Max. input power: 7W.
- AH-710 FOLDED DIPOLE ANTENNA
Covers 1.9 to 30MHz band. Has
an SO- 239 connector and 30m coaxial cable. Easy to assemble (non-kink
construction).
- RC-25 REMOTE CONTROLLER
Remote controller head. Same as
supplied.
- OPC-1106 SEPARATION CABLE
5m (16.4ft) separation cable
between controller and main unit. Same as supplied.
- OPC-1147 SHIELDED CONTROL CABLE
10m (32.8ft) shield cable
to control AT-140.
|
 |
|
